CCNA 200-301 Practice Questions Welcome to your CCNA 200-301 Practice Questions If the subnet assigned to a client is available at the remote site, then traffic must be offloaded locally, and subnets are unavailable at the remote site must be tunneled back to the WLC.learn client IP addressFlexConnect local authenticationVLAN-based central switchingcentral DHCP processing Which two events are outcomes of a successful RF jamming attack?disruption of WLAN servicesunauthentication associationdeauthentication broadcastdeauthentication multicastphysical damage to AP hardware Which two steps are needed to complete integration of the MSE to Cisco Prime Infrastructure and be able to track the location of clients/rogues on maps?Synchronize access points with the MSE.Add the MSE to Cisco Prime Infrastructure using the CLI credentials.Add the MSE to Cisco Prime Infrastructure using the Cisco Prime Infrastructure communication credentials configured during set up.Apply a valid license for Wireless Intrusion Prevention System.Apply a valid license for location tracking. An engineer is performing a Cisco Hyperlocation accuracy test and executes the cmxloc start command on Cisco CMX. Which two parameters are relevant?X, Y real locationclient descriptionAP nameclient MAC address A network engineer observes a spike in controller CPU overhead and overall network utilization after multicast is enabled on a controller with 500 APs. Which feature connects the issue?controller IGMP snoopingmulticast AP multicast modebroadcast forwardingunicast AP multicast mode On a branch office deployment, it has been noted that if the FlexConnect AP is in standalone mode and loses connection to the WLC, all clients are disconnected, and the SSID is no longer advertised. Considering that FlexConnect local switching is enabled, which setting is causing this behavior?ISE NAC is enabled802.11r Fast Transition is enabledClient Exclusion is enabledFlexConnect Local Auth is disabled A user is trying to connect to a wireless network that is configured for WPA2-Enterprise security using a corporate laptop. The CA certificate for the authentication server has been installed on the Trusted Root Certification Authorities store on the laptop. The user has been prompted to enter the credentials multiple times, but the authentication has not succeeded. What is causing the issue?The user Active Directory account is locked out after several failed attempts.There is an IEEE invalid 802.1X authentication policy on the authentication server.There is an invalid 802.1X authentication policy on the authenticator.The laptop has not received a valid IP address from the wireless controller. An engineer must use Cisco AVC on a Cisco WLC to prioritize Cisco IP cameras that use the wireless network. Which element do you configure in a rule?WMM requiredmarkpermit-ACL What is the maximum time range that can be viewed on the Cisco DNA Center issues and alarmssw page?3 days3 hours24 hours Where is a Cisco OEAP enabled on a Cisco Catalyst 9800 Series Wireless Controller?RF ProfileAP Join ProfileFlex ProfilePolicy Profile Which two protocols are used to communicate between the Cisco MSE and the Cisco Prime Infrastructurenetwork management software?SOAPNMSPHTTPSSSHTelnet Time is Up!